Blush Wall Mounted Sensor faucet

Product code SNR-CHR-51443PK
Description Blush Wall Mounted Sensor faucet with Control Box & Pre-mixed Water Supply Kit (Battery
Operated)
Water Supply Hot & Cold (2 inlets)
Water Temperature Maximum 65 ºC
Inlet Water Connection 1/2”BSP / 15mm
Recommended Water
Pressure 1.0 Bar - 5.0 Bar
Flow Rate 8.50 LPM @ 3 bar
Material Composition
Specifi cation in
Percentage
Brass Ingots as per IS:1264-1997
Cu (58.0-63.0), Sn (0.0-1.0), Pb (0.5-2.5), Ni (0.0-1.0), Al (0.2-0.8), Mn (0.0-0.5), Total
Impurity (0.0-2.0), Zn (Remainder)
Brass Rod as per IS:319-1989
Cu (56.0-59.0), Pb (2.0-3.5), Fe (0.0-0.35), Total Impurity (0.0-0.7), Zn (Remainder)
Brass Sheets as per IS:410-1977
Cu (61.5-64.5), Pb (0.0-0.3), Fe (0.0-0.075), Total Impurity (0.0-0.6),
Zn (Remainder)
Brass Pipe as per IS:407-1996
Cu (62.0-65.0), Pb (0.0-0.3), Fe (0.0-0.01), Total Impurity (0.0-0.6),
Zn (Remainder)
Solenoid Valve
Specifi cation
Operating pressure 1.0 - 5.0 bar
Nominal Voltage : 6 Volt DC
Low power consumption : Bi-stable pulse controlled
IP rating Protection against intrusion (control box) IP 65
Protection against intrusion (sensor eye) IP 67
Electronic Parameter
Setting Procedure Red button on Control Box
Adjustable Parameters Only Detection Range : 100 - 300MM, default : 150-180MM,
Power Source 6 Volt Battery - (4 *1.5V AA cell)
Finish
Plating: Nickel-10.0 micron Chromium-0.3 micron
Salt Spray (500 hrs + Validated)
Adhesion (Pass)
Aerator Size WRAS, ACS Approved (M16.5X1)
Available Color Finishing
Antique Bronze (ABR), Antique Copper (ACR), Black Chrome (BCH), Black Matt (BLM),
Gold Dust (GDS), Full Gold (GLD), Graphite (GRF), Stainless Steel Finish (SSF) & White Matt
(WHM)
DISCLAIMER: Our every effort has been made to ensure factual accuracy, the information presented subject to changes
due to requirements in different sites, markets and/ or countries. 10% variation in fl ow rate may be possible. Jaquar
reserves the right to make the necessary amendments at any time without prior notice