Single Piece Slim In-wall Cistern Body

Product Code JCS-WHT-2400S
Description Single Piece Slim In-wall Cistern Body with Installation Kit & “S-Type” drain pipe
connection set for Wall Hung WC (without Flush Control Plate)
Flow Rate 3.0/6.0 LPF
Features
• Tank body: Strong 80 mm thick High-density polyethylene (HDPE) ‘Single-piece’
body.
• Anti-Condensation Lining: Anti condensation lining of 6mm thick wall takes care of
temperature change.
• Inlet & Outlet Valves: Inlet valve has a special rotary structure which gives out low
noise & anti siphon function. Both valves (Inlet & outlet) are WARS approved.
• Working Pressure: 0.3-10 bar (1.0 to 3.0 bar is recommended with clear, nonaggressive water supply)
• Life Cycles of Mechanism: The lifetime of sea water test and dirty water test have
passed 100,000 cycles
• Flush Control Plates: ABS made chrome plated flush control plates which is
compatible for Single Piece Slim in-wall Cistern (JCS-WHT-2400S)
• Water inlet: ½” water supply connection from top.
• Flush volume: Factory setting 6.0~3.0 litres, Eco adjustable: 4.0~2.0 litres (Only for
WC pans designed for low volume flushing).
Application • For installation of a wall-hung WC with bolt fixing set at 180 or 230 mm centres
• For installation in a load bearing stud wall.
DISCLAIMER: Our every effort has been made to ensure factual accuracy, the information presented subject to
changes due to requirements in different sites, markets and/ or countries. 10% variation in flow rate may be
possible. Jaquar reserves the right to make the necessary amendments at any time without prior notice